The Replica Ball Engineer II Magneto S (ref. NM3022C-N1CJ-BK) features a very interesting combination of sporty -albeit a bit deceptive- exterior with a reliable -even if a bit too standard- mechanism. However, what makes this new gadget truly stand out from the ranks of other magnetically shielded wristReplica Watches is the way the shielding system actually works.

I don’t know whether it was the Swiss Replica Watch Watchmaker who had to shell a serious amount of cash to Marvel to use the name of its main supervillain, or was it the comic book publisher who plans to use the wristReplica Watch in one of its upcoming blockbusters (or, perhaps, neither of these assumptions is true and the name of the piece has nothing to do with the character), but I must admit that the new device in fact deserves some attention thanks to its ingenious, yet simple complication.
Like their last year’s Engineer II Pioneer Chronometer model, the new Replica Watch is equipped with a slightly modified ETA 2824-2 automatic movement that they prefer to call BALL RR1103-CSL. Unlike many rebranded ETA calibers from other Replica Watchmakers that often differ from the original only with a refinished oscillating weight, this COSC-certified chronometer-grade mechanism actually earned its new name.

According to the brand, they have replaced the original Incabloc system with their own “revolutionary” and patented SpringLOCK anti-shock system that, while being rated at the same 5000 G (which basically means that the movement must retain its accuracy after a drop on a concrete floor from one meter high), reduces balance-spring’s shock impact by 66%, which is quite impressive indeed.

The mechanism’s anti-magnetic protection is ensured with a MuMETAL nickel–iron alloy cage (according to Wikipedia, the alloy is usually 77% nickel, 16% iron, 5% copper and 2% chromium or molybdenum), as well as by their own A-PROOF diaphragm on the back. The latter is an exceptionally interesting device that allows you to take a look at the movement by turning the notched bezel: a very nice design for those who just have to have their daily fix by taking a loving look at the tiny engine.

Alas, the caliber’s finish is quite basic for the grade with its oscillating weight featuring the usual Geneva stripes and a gold inscription.

While there are only three micro-tubes that are filled with mildly radioactive, self-illuminating tritium gas (the rest of dial elements, including the markings and numerals on the rotating bezel, are filled with some chemical luminous compound, possibly the omnipresent Superluminova), all elements are easily readable at night with a baton-shaped hour marker at 12 hours even featuring lume of a different shade of green for easier orientation.

Although featuring styling that hints at some serious water resistance capacity, this is not a diving Replica Watch. Rated at just 100 meters, the device will allow you swim in it or do some snorkeling, but use it for real diving and you may immediately start shopping for another timekeeper, which is better suited for this sort of endeavors.

At 42 millimeters in diameter, the wristReplica Watch is similar in dimensions to the 2014 Engineer Hydrocarbon Hunley, but, with its subtler styling and better proportions, doesn’t look as massive, which is actually a good thing for a timekeeper that is supposed to be worn during office hours.

Renowned for producing specialist diving replica watches, Oris Mens Replica is proud to introduce the Oris Aquis Depth Gauge. At the forefront of mechanical replica watch innovation, Oris has harnessed its knowledge, expertise and craftsmanship to produce the first divers replica watch which measures depth by allowing water to enter the timepiece. This patented timepiece is the first of its kind to measure depth using a unique gauge built into the sapphire crystal,

The Aquis Depth Gauge is a great divers replica watch, with a water resistance of 500m. The replica watch was originally launched in 2013, solving a need for incorporating depth gauge into a mechanical replica watch while staying true to the Oris design. The 48mm case and easy to read dial and bright yellow depth gauge.
Beating within this beast of a cheap replica watch is the Oris Cal. 774 automatic movement that is based on the Selita SW 500. The replica watch is finished off with a black rubber strap fitted with the Oris quick adjustment sliding-sledge folding clasp system, that enables the wearer to adjust the strap or bracelet without having to take the replica watch off, and the Oris safety anchor, which prevents the replica watch from falling of even when it comes undone.Overall, the new Oris Aquis Depth Gauge is exactly what you might expect, a great tool replica watch built for people who love to dive.

Hamilton introduced the modern incarnation of its famous Pan-Europ replica watch at the 2011 Baselworld fair. It was a design based on an original, which debuted in 1971, and it’s done well enough to merit the release of a less-complicated variant, which we saw at last year's Basel.

Hamilton- Pan-Europ -Replica.png

The dial on this Hamilton Pan-Europ replica watch features a sunburst texture emanating from the center. This means the dial catches light from many different angles, resulting in viewing situations that range from optimal to near possible. They are nicely designed hands, and feature a healthy amount of lume along their length, but we’d prefer a set of chunkier hands more akin to the original.

Let’s take a closer look at the details that we think Hamilton got right with the new Pan-Europ replica watch. The most prominent feature of this Hamilton replica watch is its case. The soft fusion shape is accentuated by a polished lip separating the brushed wall and lug shoulders. It cuts the contrast between the two surfaces and serves to give a more rounded appearance to the case overall. At 42 mm, the Pan-Europ Auto cheap replica watch falls into the large-but-wearable crowd, and thanks to the sloped lugs wears a touch smaller than its size would suggest.
Hamilton- Pan-Europ -Replica2.jpg

The bezel extends right out to the edge of the case on the Hamilton replica watch with a notched and polished lip that protrudes beyond the bezel ring. While the notches do provide some grip, the polishing of that lip make rotating the bezel a challenge. The bezel ring itself is thin in profile, adding to that retro personality meant to invoke its heritage. A large white chapter ring angles towards the dial, with notches cut out for the applied hour indices.
Hamilton- Pan-Europ -Replica3.jpg
The newest iteration of the Pan-Europ replica watch is a faithful rendition of the original first seen in the early '70s – at a glance, that is. The case-to-bezel ratio, the notch-y hour markers, and thick-cut cushion case are all present, and lend to the retro personality of the new Pan-Europ replica watch, but upon closer inspection, a few details emerge that place this firmly in modern territory. In many ways this is a good thing, providing value, practicality, and build quality that you may find suspiciously absent in many 40-year-old-plus watches.

This year, the brand pushes creativity and offers the Altiplano Cloisonné Enamel luxury replica watch to hail the Year of the Monkey.
Since 2012, Piaget has been paying a tribute to this Chinese tradition with the Art and Excellence collection of replica watches, featuring the year's zodiac sign, designed with the Grand Feu cloisonné enamelling style.
Piaget joins in the list with Altiplano Cloisonné Enamel replica watch.
To celebrate and ring in the Chinese New Year, international luxury brands across the board are creating special editions.
Limited to 38 pieces, Altiplano replica watches are available exclusively at Piaget Boutiques. The dial has a Piaget 430P hand-wound mechanical manufacture movement.
The enamel work on this timepiece is further enhanced by Piaget's gem-setting expertise. The Piaget replica watch is crafted from 18 karat white gold, set with 78 brilliant-cut diamonds. World-renowned master enameller Anita Porchet has crafted this beautiful timepiece with an exceptional interpretation. She has partitioned the enamel using the cloisons method, making it clear and detailed. A work of art, it isolates the colours and ensures an optimally clear vision of the shading. Additionally, the artwork is enhanced with the use of a delicate glistening fur coat on the monkey.

We checked out the blue dial version, close-up, back in March, at Baselworld.
New for 2016, are two 43 mm diameter stainless steel Aquaracers (black or blue dial), with stainless steel bezels. The replica TAG Heuer Aquaracer 300M comes in 41 mm and 43 mm diameter automatic models (in steel or titanium) – with either a ceramic or steel bezel. But if you don’t want the typical sporty two-tone diver’s replica watch look, this is a good alternative. Moreover, the bezel will scratch easier than a ceramic bezel. The dive scale numerals are engraved and then filled with blue or black lacquer, depending on which dial you choose. There is a white lume-filled dot at 12 o’clock, marking zero. Distinguished by its steel rotating bezel, this Aquaracer presents differently than two-tone bezels dive replica watches (from TAG Heuer mens replica and other manufacturers), as the steel bezel matches the steel case, instead of contrasting. Notably, the bezel is both brushed and polished, the flanks are polished – while the rest of the case, is brushed.

And if the steel bezel is not for you, pay a little more and get one of the ceramic bezel Aquaracers. If you are looking for an ISO 6425 diver’s replica watch from one of the big names in watchmaking but don’t want to pay five grand plus, this is one of the best options.

The outer chapter ring has white printed graduations that indicate seconds/minutes in conjunction with the seconds and minutes hands, respectively. Big baton-shaped, polished and facetted, luminescent hands indicate the hours and minutes. A polished seconds hand, with a yellow tip with lume, continuously sweeps the dial. An angled date aperture with a magnifying lens overtop is positioned at 3.

The dial features what TAG Heuer cheap replica watch calls a “horizontal streak effect.” It has prominent hand-applied polished and facetted indexes that mark the hours, including a luminescent treatment for low-light visibility.
Water-resistance is 300 meters. The oscillating weight has Geneva stripes and is engraved “TAG Heuer — Calibre 5 — Swiss Made,” although this is a dive replica watch, so naturally the solid steel screwed-down caseback (engraved with a diving bell) is covering it up. A basic 4Hz (28,800 vph) Swiss automatic movement powers the functions and has a power reserve of 38-hours. (Ref. The replica TAG Heuer Aquaracer 300M 43 mm dive replica watch with steel bezel is presented with a matching 3-row, brushed steel bracelet. WAY2012.BA0927)
The stainless steel screwed-down crown is polished and emblazoned with the TAG Heuer logo.